Leverage the Evaluation kit to get you started with your design journey. Plus, create up to 7 different camera configurations as needed, all on your own.
The Dragonfly S Evaluation Kit is meant for use with CS-mount models. Camera and heatsink are not included. A custom heatsink is required for board-level and partial case configurations.
The evaluation kit includes:
USB3, 1 meter, Type A-male to Micro-B (Horizontal Locking) Cable (ACC-01-2313)
Dragonfly S Universal Locking Bracket (ACC-01-0020)
0.3 m 6-pin JST Connector GPIO Cable (ACC-01-3015)
CS- to C-mount 5 mm Spacer Adapter (ACC-01-5004)
Tripod Adapter (ACC-01-0017)
Dragonfly S S-mount Front
Dragonfly S Thermal Pad
Items in the kit identified with part numbers can also be purchased separately.
- Products
- Industrial
- Machine Vision Cameras
- Accessories
- Development Kits
- Evaluation Kit for Dragonfly S CS-mount Cameras
Added to cart
Create up to 7 Configurations
Step 1: Select a CS-mount camera of your choice
- Monochrome, back USB connector (PN: DR-50Y2M-C1-CS)
- Color, back USB connector (PN: DR-50Y2C-C1-CS)
- Monochrome, side USB connector (PN: DR-50Y2M-C3-CS)
- Color, side USB connector (PN: DR-50Y2C-C3-CS)
Step 2: Add the Evaluation Kit (PN: EVAL-KIT-DR-U3)
Step 3: Create any of these configurations
- C-mount full case camera
- C-mount partial case camera
- CS-mount full case camera
- CS-mount partial case camera
- S-mount full case camera
- S-mount partial case camera
- Board-level camera without mount
Evaluation Kit Components
Item | What is it used for? |
S-mount front | Replaces CS mount front - enables use of M12 lens |
Optical C-mount 5 mm Spacer | Use a C-mount lens with the CS-mount front |
Tripod adapter | Mount the camera to a tripod (1/4-20 thread). This requires full or partial camera case |
USB cable | Connection to the PC |
JST cable | GPIO cable for trigger input, strobe output, or residual power |
Universal locking bracket | Stabilizes the USB connection on board level and partial case configurations |
Thermal Pad | Replacement thermal pad Original pad may become compressed following multiple configuration changes. |
Choice of Lens
Mount
S-mount or CS-mount front
C-mount 5 mm Spacer
Choice of Connector Orientation
Side or Back
Choice of Cased, Board-level, Partial Cased
For board-level and partial case Dragonfly S models, the universal locking bracket provides mechanical stability for the USB connector.
Applicable Products
Related Documents
Export Restrictions
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.